Repeaters & Hubs

The VP−2L is a high−performance line amplifier for computer graphics video signals with resolutions up to and exceeding UXGA. It provides controls to compensate for signal losses inherent in long cable runs.

The VP-210xl is a high-performance line amplifier for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. It provides controls to compensate for signal losses inherent in long cable runs.

The VP−210K is a high−performance line amplifier for computer graphics video signals with resolutions up to and exceeding UXGA. The unit provides controls to compensate for signal losses inherent in long cable runs.

The VP−111K is a high−performance line driver for signals exceeding UXGA. It provides controls to compensate for signal losses inherent in long cable runs.

The VP−12NHD is a high−performance distribution amplifier for computer graphics video signals. It takes one input, provides correct buffering and isolation, and distributes the signal to 12 computer graphics outputs on 15−pin HD connectors and three twisted pair outputs.

The VP-200AK is a high-performance distribution amplifier for computer graphics video signals, with resolutions up to and exceeding UXGA, and stereo audio signals. It takes a computer graphics video and an unbalanced stereo audio input and outputs simultaneously two computer graphics video, two balanced, and two unbalanced stereo audio signals.

The VP-2K is a high-performance distribution amplifier for computer graphics video signals, with resolutions up to and exceeding UXGA, and unbalanced stereo audio signals. The unit distributes one input signal to two identical outputs.

The VP-200D is a high-performance differential distribution amplifier for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. It includes differential amplifying circuitry to help eliminate noise often found in long cable runs.

The VP-200Dxl is a high-performance differential line and distribution amplifier for computer graphics video signals with resolutions up to and exceeding UXGA. It includes differential circuitry to help eliminate noise often found on the input cable in a long run.

The VP-250, VP-350 and VP-450 are high-performance distribution amplifiers for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. They take one input, provide correct buffering and isolation, and distribute the signal to two, three and four identical outputs.

The VP−200K is a distribution amplifier for computer graphics signals up to and exceeding UXGA. The unit takes one input, provides correct buffering and isolation, and distributes the signal to two identical outputs.

The VP−200NK, VP−300NK and VP−400NK are high−performance distribution amplifiers for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. They take one input, provide correct buffering and isolation, and distribute the signal to two, three, and four identical outputs.

The VP-200xl is a high-performance line and distribution amplifier for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. It provides controls to compensate for signal losses inherent in long cable runs.

The VP-200xln is a high-performance line and distribution amplifier for computer graphics video signals with resolutions up to and exceeding UXGA. It provides controls to compensate for signal losses inherent in long cable runs.

The VP−22 is a high−performance computer graphics video processor, line, and distribution amplifier for computer graphics video signals with resolutions up to and exceeding UXGA. It takes one input, provides correct buffering and isolation, and distributes the signal to one 15−pin HD and one set of five BNC outputs.

The VP−72 is a seven input multi−format distribution amplifier for composite, s−Video, component (HDTV or SDTV), and computer graphics video signals with resolutions up to and exceeding UXGA. It was designed from user feedback to complement Kramer’s ProScale™ digital scaler/switcher line and includes seven 1:2 distribution amplifiers in one package: two composite, two s−Video (Y/C), one component, and two computer graphics video.

The VP−11 is a high−performance processor for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. It allows the user to adjust and enhance an incoming computer graphics signal and distribute the processed signal to three simultaneous outputs.

The VP−250, VP−350 and VP−450 are high−performance distribution amplifiers for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. They take one input, provide correct buffering and isolation, and distribute the signal to two, three and four identical outputs.

The VP-3xl is a high-performance distribution amplifier for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. The unit takes one input, provides correct buffering and isolation, and distributes the signal to three identical outputs.

The VP−300K is a distribution amplifier for computer graphics signals with resolutions up to and exceeding UXGA. The unit takes one input, provides correct buffering and isolation, and distributes the signal to three identical outputs.

The Kramer VP-3 is a newly updated, high-performance 1:3 distribution amplifier designed to accept a single VGA, SVGA, XGA, etc., source and distribute it to three identical outputs using female 15pin HD connectors. Bandwidth 350MHz ensures that the VP-3 remains transparent even at high-resolution VGA modes. The input and outputs are DC coupled, and provide buffering and isolation which conforms to the highest standards. The VP-3 is housed in a rugged, desktop sized enclosure but can be rack mounted using the RK-MEDN kit which holds one unit in one vertical space of a standard 19” rack. Combined with Kramer’s other VGA switchers and DA’s, many VGA routing requirements can be solved.

The VP-200N, VP-300N, & VP-400N are high-performance distribution amplifiers for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. They take one input, provides correct buffering and isolation, and distribute the signal to two, three or four identical outputs.

The VP−250, VP−350 and VP−450 are high−performance distribution amplifiers for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. They take one input, provide correct buffering and isolation, and distribute the signal to two, three and four identical outputs.

The VP-4xl is a high-performance distribution amplifier for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. The unit takes one input, provides correct buffering and isolation, and distributes the signal to four identical outputs.

The VP−400K is a distribution amplifier for computer graphics signals with resolutions up to and exceeding UXGA. The unit takes one input, provides correct buffering and isolation, and distributes the signal to four identical outputs.

The VP-5xl is a high-performance distribution amplifier for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. The unit takes one input, provides correct buffering and isolation, and distributes the signal to five identical outputs.

The VP−5R is a high−performance distribution amplifier for computer graphics video signals on a twisted pair cable. It takes one twisted pair input and distributes the signal to five identical computer graphics video outputs on 15−pin HD connectors.

The VP−6A is a high−performance distribution amplifier for computer graphics video signals with resolutions up to and exceeding UXGA and balanced or unbalanced stereo audio signals. It takes one input, provides correct buffering and isolation, and distributes the signal to 6 computer graphics video outputs on 15−pin HD connectors and one AV twisted pair output on an RJ−45 connector.

The VP-6xlN is a high-performance distribution amplifier for computer graphics video signals with resolutions up to and exceeding UXGA. It takes one input, provides correct buffering and isolation, and distributes the signal to six identical outputs.

The VP-108 is a high-performance computer graphics video amplifier for computer graphics signals, with resolutions up to and exceeding UXGA, and balanced stereo audio signals. It takes one computer graphics and a balanced stereo audio input signal and outputs eight computer graphics and balanced stereo audio signals.

The VP-8K is a high-performance distribution amplifier for computer graphics video signals with resolutions up to and exceeding UXGA. It takes one input, provides correct buffering and isolation, and distributes the signal to eight identical outputs.

The VP-14 is a port extender for RS-232 data signals. It sends data from any port to the other three.

The VS−4FW is a high−performance bidirectional hub/repeater for 6−pin FireWire® (IEEE 1394) signals. It increases the number of ports available and/or extend the distance of FireWire® cable runs.

The PL-15 is a 5-port hub for connecting devices in a K-NET™ network. The unit supplies power and 2-way communication between up to five devices on a single cable.

The Kramer VS-6FW is a six port FireWire® repeater/hub for any application where additional FireWire® (IEEE 1394) ports are needed. Several hubs may be cascaded to create up to a 63 port FireWire® system. It supports 100, 200, and 400 Mbps transfer rates, enabling high rate digital video transfer, and it allows for "hot plugging". On all its ports, the hub includes unique electronic surge protectors against static and other pulse induced damages. The machine effectively extends the standard 4.5 meter (15 feet) operation range of FireWire®, even doubling the range when using appropriate cabling. It is housed in a Kramer Tools enclosure, and is fed from a 12VDC power supply.

The VS−8FW is a high−performance bidirectional hub/repeater for 6−pin FireWire® (IEEE 1394) signals. It increases the number of ports available and/or extend the distance of FireWire® cable runs.

The WP−4iR is an infrared signal repeater that can operate at distances up to 75m (240ft). The unit extends infrared signals into areas where there is no direct line−of−sight for normal infrared signal operation.

The VP-103 is a line amplifier and format converter for computer graphics video signals. It accepts a computer graphics video input on a 15-pin HD connector and converts it to two identical outputs of either RGBS, RGsB, or RGBHV.

The PT−4iREX is an infrared signal repeater that can operate at distances of up to approximately 75m (240ft). This model extends infrared signals in areas where there is no direct line−of−sight for normal infrared signal operation.

The PT−5T and PT−5R are a twisted pair transmitter and receiver for infrared signals. The units control up to five devices via their own remote control IR transmitters at distances of up to 250m (820ft) over twisted pair cable.